7.1.2.2 IfcDoorPanelPositionEnum

This enumeration defines the basic ways to describe the location of a door panel within a door lining.

HISTORY  New Enumeration in IFC2x

Figure 251 shows the designation of a door panel with PanelPosition = LEFT and a door panel with PanelPosition = RIGHT within a door style with OperationType = DOUBLE_DOOR_SINGLE_SWING. The position is given as shown in the XZ plane of the local placement, looking into the direction of the positive Y axis.

Figure 251 — Door panel positions

XSD Specification:

 <xs:simpleType name="IfcDoorPanelPositionEnum">
  <xs:restriction base="xs:string">
   <xs:enumeration value="left"/>
   <xs:enumeration value="middle"/>
   <xs:enumeration value="right"/>
   <xs:enumeration value="notdefined"/>
  </xs:restriction>
 </xs:simpleType>

EXPRESS Specification:

TYPE IfcDoorPanelPositionEnum = ENUMERATION OF (
LEFT,
MIDDLE,
RIGHT,
NOTDEFINED);
END_TYPE;

Link to EXPRESS-G diagram EXPRESS-G diagram

Link to this page  Link to this page