|Stockage des déchets|
|Ablauf / Abscheider |
A waste terminal has the purpose of collecting or intercepting waste from one or more sanitary terminals or other fluid waste generating equipment and discharging it into a single waste/drainage system.
A waste terminal provides for all forms of trap and waste point that collects discharge from a sanitary terminal and discharges it into a waste/drainage subsystem or that collects waste from several terminals and passes it into a single waste/drainage subsystem. This includes the P and S traps from soil sanitary terminals, sinks, and basins as well as floor wastes and gully traps that provide collection points.
HISTORY New entity in IFC4
Common Use Definitions
The following concepts are inherited at supertypes:
- IfcRoot: Identity, Revision Control
- IfcElement: Product Placement, Box Geometry, FootPrint Geometry, Body SurfaceOrSolidModel Geometry, Body SurfaceModel Geometry, Body Tessellation Geometry, Body Brep Geometry, Body AdvancedBrep Geometry, Body CSG Geometry, Mapped Geometry
- IfcDistributionElement: Spatial Containment
- IfcDistributionFlowElement: Axis Geometry, Clearance Geometry, Lighting Geometry
The Object Typing concept applies to this entity as shown in Table 619.
Table 619 — IfcWasteTerminal Object Typing
Property Sets for Objects
The Property Sets for Objects concept applies to this entity as shown in Table 620.
Table 620 — IfcWasteTerminal Property Sets for Objects
The Quantity Sets concept applies to this entity as shown in Table 621.
Table 621 — IfcWasteTerminal Quantity Sets
The Material Constituents concept applies to this entity as shown in Table 622.
|Casing||Material from which the casing is constructed.|
|Cover||Material from which the cover or grating is constructed.|
Table 622 — IfcWasteTerminal Material Constituents
The Port Nesting concept applies to this entity as shown in Table 623.
Table 623 — IfcWasteTerminal Port Nesting
XSD Specification: <xs:element name="IfcWasteTerminal" type="ifc:IfcWasteTerminal" substitutionGroup="ifc:IfcFlowTerminal" nillable="true"/>
<xs:attribute name="PredefinedType" type="ifc:IfcWasteTerminalTypeEnum" use="optional"/>
|CorrectPredefinedType|| : ||NOT(EXISTS(PredefinedType)) OR
(PredefinedType <> IfcWasteTerminalTypeEnum.USERDEFINED) OR
((PredefinedType = IfcWasteTerminalTypeEnum.USERDEFINED) AND EXISTS (SELF\IfcObject.ObjectType));|
|CorrectTypeAssigned|| : ||(SIZEOF(IsTypedBy) = 0) OR
('IFCPLUMBINGFIREPROTECTIONDOMAIN.IFCWASTETERMINALTYPE' IN TYPEOF(SELF\IfcObject.IsTypedBy.RelatingType));|
|CorrectPredefinedType|| : |
|CorrectTypeAssigned|| : ||
Either there is no waste terminal type object associated, i.e. the IsTypedBy inverse relationship is not provided, or the associated type object has to be of type IfcWasteTerminalType.
Link to this page