5.3.2.3 IfcProcedureTypeEnum

The IfcProcedureTypeEnum defines the range of different types of procedure that can be specified.

HISTORY  New type in IFC2x2

Enumerated Item Definitions:

  • ADVICE_CAUTION: A caution that should be taken note of as a procedure or when carrying out a procedure
  • ADVICE_NOTE: Additional information or advice that should be taken note of as a procedure or when carrying out a procedure
  • ADVICE_WARNING: A warning of potential danger that should be taken note of as a procedure or when carrying out a procedure
  • CALIBRATION: A procedure undertaken to calibrate an artifact
  • SHUTDOWN: A procedure undertaken to shutdown the operation an artifact
  • STARTUP: A procedure undertaken to start up the operation an artifact
  • USERDEFINED
  • NOTDEFINED
  • XSD Specification:

     <xs:simpleType name="IfcProcedureTypeEnum">
      <xs:restriction base="xs:string">
       <xs:enumeration value="advice_caution"/>
       <xs:enumeration value="advice_note"/>
       <xs:enumeration value="advice_warning"/>
       <xs:enumeration value="calibration"/>
       <xs:enumeration value="diagnostic"/>
       <xs:enumeration value="shutdown"/>
       <xs:enumeration value="startup"/>
       <xs:enumeration value="userdefined"/>
       <xs:enumeration value="notdefined"/>
      </xs:restriction>
     </xs:simpleType>

    EXPRESS Specification:

    TYPE IfcProcedureTypeEnum = ENUMERATION OF (
    ADVICE_CAUTION,
    ADVICE_NOTE,
    ADVICE_WARNING,
    CALIBRATION,
    DIAGNOSTIC,
    SHUTDOWN,
    STARTUP,
    USERDEFINED,
    NOTDEFINED);
    END_TYPE;

    Link to EXPRESS-G diagram EXPRESS-G diagram

    Link to this page  Link to this page