6.1.2.11 IfcMemberTypeEnum

This enumeration defines the different types of linear elements an IfcMember or IfcMemberType object can fulfill.

HISTORY  New enumeration type in IFC2x2.
IFC2x2 CHANGE  The additional identifiers CHORD, PLATE, STUD are added.
IFC2x3 CHANGE  The additional identifier MULLION are added.

Enumerated Item Definitions:

XSD Specification:

 <xs:simpleType name="IfcMemberTypeEnum">
  <xs:restriction base="xs:string">
   <xs:enumeration value="brace"/>
   <xs:enumeration value="chord"/>
   <xs:enumeration value="collar"/>
   <xs:enumeration value="member"/>
   <xs:enumeration value="mullion"/>
   <xs:enumeration value="plate"/>
   <xs:enumeration value="post"/>
   <xs:enumeration value="purlin"/>
   <xs:enumeration value="rafter"/>
   <xs:enumeration value="stringer"/>
   <xs:enumeration value="strut"/>
   <xs:enumeration value="stud"/>
   <xs:enumeration value="userdefined"/>
   <xs:enumeration value="notdefined"/>
  </xs:restriction>
 </xs:simpleType>

EXPRESS Specification:

TYPE IfcMemberTypeEnum = ENUMERATION OF (
BRACE,
CHORD,
COLLAR,
MEMBER,
MULLION,
PLATE,
POST,
PURLIN,
RAFTER,
STRINGER,
STRUT,
STUD,
USERDEFINED,
NOTDEFINED);
END_TYPE;

Link to EXPRESS-G diagram EXPRESS-G diagram

Link to this page  Link to this page