4.4.2.5.1 Profile 3D Geometry

The Profile 3D Geometry is the standard representation of the outer profile for elements filling an opening. Examples of such elements include doors and windows. In the case of doors and windows the profile geometry is used to apply the parametric definition of lining and panel dimensions to the profile.

The following attribute values for the IfcShapeRepresentation holding this geometric representation shall be used:

Figure 38 illustrates an instance diagram.

Profile 3D GeometryIfcElementIfcProductDefinitionShapeIfcShapeRepresentationIfcGeometricRepresentationContextIfcLabelIfcLabelIfcBoundedCurve

Figure 38 — Profile 3D Geometry

Link to this page  Link to this page