The example shows a straight beam with an I-Shape cross section being tessellated with a fine mesh. Figure 475 and Figure 476 display the rendering in a target application.

NOTE  The density of the mesh depends on the algorithm used by the application. In general it is recommended to not use an overly fine mesh to minimize data set sizes. The mesh density of the example is already very high.

The example shows a tessellation without adding the normals at each vertex to the data set.

beam_straight_tessellated_reference-view_edges beam_straight_tessellated_reference-view_shaded

Figure 475 — tessellated beam visualized with edges visible

Figure 476 — tessellated beam visualized without edges

NOTE  There is no color information within the file, the displayed color has been set by the target application as a default.